701MI Feature

PROSCEND 701MI, an industrial-grade 2-port 10/100Base-TX RJ-45 Ethernet Extender with a M12 connector, is designed to extend the reach of network data over existing twisted pair or coaxial cables beyond the standard 100m limit and works well for industrial applications, such as railway or surveillance.

Built-in Industrial M12 connector

Featuring M12 Ethernet connector design, the 701MI is perfectly adapted to unprotected industrial environments for reliable data transmission and protection against severe interference. PROSCEND 701MI takes advantage of M12 cabling connection for maintaining signal integrity and performance.

Industrial Ethernet over VDSL2 
Utilizing VDSL2 Technology, the 701MI offers fastest data transmission up to 100 Mbps rate within 300M, or 20 Mbps bandwidth for 1.2 Km long range connections. Built in wide temperature operation range from -40°C to 75°C with a rugged IP30 aluminum housing, the 701MI is suitable for use in harsh environments and outdoor cabinet. The 701MI ensures reliable performance and is resistant to shock and vibration. 

701MI Application

Flexible Deployment and Easy Installation

To fulfill the market demand, the 701MI is equipped with two Ethernet ports and an Industrial M12 connector for expanding at least 3 devices. A user-friendly DIP switch can be easily adjusted three modes, VDSL2 'Band-Plans' (Asymmetric or Symmetric), SNR margin (6dB or 9dB) and Master or Remote mode. It also can be set up to connect with the other 701MI or with other PROSCNED Long Reach PoE extenders ─the 100MP with one PoE (PSE) port and 101MP with four PoE (PSE) ports for each power budget of 30W that can support any remote IEEE 802.3at powered device (PD) like Wi-Fi Access Point, IP phone, and IP Camera. PROSCEND 701MI Ethernet Extender is the superior choice for quick deployment and efficient installation to reduce cost and extend performance of connections between industrial networking. 

More Efficient Network Utilization and Reliable Capabilities

PROSCEND provides a complete range of Ethernet Extenders to benefit from utilizing existing copper cabling infrastructure and meet your point-to-point applications requires. Please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for more information. 


Point-to-Point Ethernet Extension Solutions

Model NameDescription

Ethernet Extender (701MI)


  • Interface: 2 x RJ45 100Base-T Ethernet Ports + 1 x M12 Connector 
  • Operating Temperature: -40 to +75°C
  • DC Power Input: DC 10~60V 
  • Dimensions (WxHxD): 62 x 135 x 106.5 mm
  • Read more

Ethernet Extender (101MI-G) 


101MI-G Ethernet Extender

  • Interface: 4 x 1000Base-T RJ-45 Gigabit Ethernet Ports + 1 x RJ-45 connector for VDSL2
  • Operating Temperature: -40°C ~ +75°C 
  • DC Power Input: Plug In
  • Dimensions (WxHxD): 88 x 40 x 110.7 mm
  • Read more

 Ethernet Extender (100MI) 



  • Interface: 1 x RJ-45 100Base-T Ethernet Port + 1 x RJ-45 connector for VDSL2
  • Operating Temperature: 0°C ~ +45°C 
  • DC Power Input: DC 12V
  • Dimensions (WxHxD): 72.5 x 23 x 94.5 mm
  • Read more

Copper SFP Module (180-C/180-R)



  • Interface: RJ-45 (LRE Port)
  • Operating Temperature: -20°C ~ +75°C (SFP Cage)
  • DC Power Input: DC 12V
  • Dimensions (WxHxD): 79.2 x 17 x 13.5 mm
  • Read more

Long Reach PoE (100MP)



  • Interface: 1 x RJ-45 1000Base-T IEEE 802.3at PoE Port + 1 x RJ-11 for Copper Port
  • Operating Temperature: -20°C ~ +65°C
  • DC Power Input: DC 48~57V
  • Dimensions (WxHxD): 90.5 x 40 x 117 mm
  • Read more

Long Reach PoE (701MP/101MP)

LR PoE Extenders 01

  • Interface: 4 x RJ-45 1000Base-T IEEE 802.3at PoE Ports
  • Operating Temperature: -40°C ~ +75°C
  • DC Power Input: DC 48~57V
  • Dimensions (WxHxD): 62 x 135 x 106.5 mm
  • Read more