|
 |
500 Interface Converter |
Proscend 500 Interface Converter includes two major functions: as an Ethernet over E1 converter and as an Ethernet over Serial converter.
Ethernet over E1 Converter
The Ethernet over E1 converter offers a channelized E1 and 10/100Base-T interface conversion. It can provide the user with Ethernet over E1 conversion enabling the user to transport Ethernet data over an E1 link.
Ethernet over Serial Converter
The Ethernet over Serial converters connect serial based equipment across an Ethernet network. Serial data sent and received on serial ports on the serial to Ethernet adapter are encapsulated in Ethernet packets in a manner that best fits the type of data being transported.
Features
- As an Ethernet over E1 Converter, it can be:
- Bridging Ethernet LANs over existing TDM (E1) telecom network
- Extending Ethernet networks utilizing TDM (E1) landline based telecom infrastructure
- As an Ethernet over Serial Converter, it can be:
- Communicate to multiple serial devices at the time across a network
- Cable replacement using serial-Ethernet
- Have virtual COM ports connect PC/servers to remote serial devices over Ethernet
- Use serial-Ethernet to replace existing serial dial-up modem connections
- Manage the serial console port on remote equipment (Servers, routers, switches, PBX's, etc) over Ethernet or through out of band connections
- Use serial-Ethernet to connect serial PLCs to Ethernet
- Connect serial signage equipment over Ethernet with serial-Ethernet adapters
Application
Specifications |
E1(G.703) Interface:
- Framing : Unframed/PCM30/PCM31
- Bit rate : 2048 Mbps
- Line code : AMI/HDB3
- Line impedance : unbalanced 75 ohm(BNC) / balanced 120 ohm(RJ-45)
|
Serial(V.35) Interface:
- Connection: DB-25(F)
- Connection: DB-25(F)
- Support RS-530, V.35 or V.36/X.21
- Line impedance : unbalanced 75 ohm(BNC) / balanced 120 ohm(RJ-45)
|
Ethernet Interface:
- 10/100Mpbs Half/Full Duplex, Auto-sensing, Auto-Crossover
- Up to 2048 MAC address learning
- Connection: RJ-45 for Ethernet cable
|
Management:
- Configuration with keypads and LCD display
- Console port (RJ45, RS232C)
- Support firmware upgradeable
|
Loopback Tests:
- Local Digital Loopback
- Local Loopback
- Remote Line Loopback
- Remote Payload Loopback
- Far-end Line Loopback
- Far-end Payload Loopback
- Build-in 2047 Test pattern & BER Tester
|
Physical/Electrical:
- AC Input: 90~240Vac with 50~60Hz
- Power Consumption: 12W Max
- Operation temperature: 0 to 50°C
- Humidity: Up to 95% (non-condensing)
- External screw for frame grounding
|
Ordering Information
| 500-AC | Interface Converter(Ethernet over E1, Ethernet over Serial) |
* Features and specifications are subject to change without notice
|
